Heyday Earbuds Pairing: Why Won’t My HeyDay Earbuds Connect? [SOLUTION]

The Heyday Earbuds Pairing problem is a common one. Are you asking yourself “Why Won’t My HeyDay Earbuds Connect?” First, you should ensure that you’re using a Bluetooth device. 

How to Fix Bluetooth Pairing Issues...
How to Fix Bluetooth Pairing Issues - iOS 14
Heyday Earbuds Pairing - Pair of Heyday Earbuds

Check the left ear cup to see if there’s an LED that blinks. If it does, then you’re ready to pair your Heyday earbuds. 

If you’re not seeing any lights, try long-pressing the Bluetooth icon on your phone.

Go to Settings > System Preferences and find the Bluetooth option. 

Once you’ve selected the HEYDAY EARBUD 01 or 02 devices, select the HEYDAY HEADPHONE-01 connection.

If you’re on an Android device, it may take some time for Heyday earbuds to connect to your phone.

First, make sure that you have the device headphone name set correctly – HEYDAY HEADPHONE 01 in this case. 

Then, enable Bluetooth on your phone and pair the headphones with your device. Once you’re done pairing, you can turn on the Heyday BT earbuds.

Open Your Bluetooth Device

Next, open your Bluetooth device. In the Settings section of your Bluetooth device, locate Heyday Headphone 01 and click on it. If you see the HEYDAY HEADPHONE 01 in there, it’s probably the device that’s having trouble connecting to your phone. 

To make sure that the earbuds are connected to your phone, you must turn on the phone’s Bluetooth setting. 

If the device has Bluetooth, then you’re good to go. Otherwise, you might end up with a useless pair.

Once you’ve made sure that your Heyday earbuds are connected to your phone, go to Bluetooth settings and press the button on your headset to turn them on. Then, turn your phone off and on again, to ensure they’re fully charged. 

After that, you’ll be able to use your Heyday earbuds as soon as you turn them back on. If you have Bluetooth-enabled devices, they should automatically connect to your phone.

Your Heyday device should show as connected to your phone. If you’re not sure, then it’s time to fix your Heyday earbuds. You can do this yourself by pressing the phone button. 

After that, you’ll need to turn on the Bluetooth device to make sure the Heyday earbuds are in the proper position. You’ll need to be careful with this, as you don’t want to damage your iPhone or Android.

The Heyday earbuds don’t work with your phone. This means you’re using an incompatible version of your smartphone. 

Hopefully, your Android device will recognize the Heyday earbuds. If it doesn’t, you can try another device. After you’ve paired your heyday IPA, and your device will have the same connection status.

Why Are My Wireless Earbuds Not Pairing?

If your Bluetooth earbuds are not pairing, they could be due to the battery running out or the device being out of range. 

To find out which of these factors is causing the problem, try to pair your earmuffs with your phone. Usually, this is as easy as turning on the Bluetooth on both devices. If you can’t pair them, try to remove both earmuffs and try again. If the problem persists, try restarting your device.

If the earbuds are not pairing, you need to check the settings on both your device and your earmuffs. In some cases, the earbuds may have been plugged into the charging case for too long, or they may be out of sync. 

Make sure to remove them from the case and plug them into their charging cable. To pair them, place them back in the charging case and restart your phone.

If the pairing process is too lengthy or too complicated, you can try the simplest solution – just use another pair of earbuds. If you can’t find another pair, try plugging your earbuds into the charging case again. 

The simplest solution is to replace the earmuffs. The resetting process will fix the problem in most cases. You can also change the settings of your media device to see if this helps.

Sometimes, the Bluetooth pairing process is not working properly. To solve this issue, try changing your device’s setting. You can do it by following the steps below. To pair your earbuds, hold down the power button for a few seconds. 

Then, remove the earbud from the charging case and connect the other earbud. It is likely that the problem will be solved.

If the earbuds are not pairing, you can try another pair. Depending on the brand, a broken wire inside the earmuff may be the culprit. You can either fix the earbuds yourself or take them to a repairman to repair them.

Alternatively, you can try a different set of earmuffs. In most cases, the Bluetooth issue will be resolved.

The earbuds may be out of sync. 

Heyday Earbuds Pairing: Summary

Generally, Bluetooth earbuds aren’t compatible with wired earbuds. You need to disconnect and reconnect the wireless earbuds to make sure they are properly connected. 

You can also check the settings of your media device by pressing the power button and tapping the center of the slider to ensure a balanced sound. If the problem persists, the device may be out of sync with your earmuffs.

If the earmuffs are out of sync, try resetting them. You may need to restart the Bluetooth device to make it work again. If this doesn’t work, check your batteries. A low battery level can cause problems with your Bluetooth earbuds.

If the earbuds are out of sync, you can also reset your device to a full charge before using it.

How to Reset Heyday Wireless Earbuds

First, turn them on/off and make sure that the indicator light on the left earmuff is flashing white or red. 

Second, go to the Apple menu and select System Preferences. Then, select Bluetooth. Then, choose the corresponding HEYDAY HEADPHONE 01 earbuds.

Next, make sure that the earbuds are turned off. Push the power button on the earphones and wait for a few seconds. If the LEDs are blinking white or red, the earbuds are reset. Once done, you can connect your HI-Z wireless EARBUDS with your smartphone or tablet. 

However, be aware that you can only use the HI-Z earbuds one time at a time, so make sure you don’t forget to remove them from their charging case.

The HI-Z Wireless Earbuds are powered by a micro USB charging cable and a Bluetooth switch. To turn them on, you must press the button on your device’s headphone’s side. 

After a few seconds, you’ll notice the lights on the HI-Z earbuds will rapidly flash. The device will start searching for other compatible devices. If your Heyday HI-Z wireless earbuds are paired, you can press the pairing button.

If you’re having trouble pairing with your HI-Z earbuds, try to remove them from their charging case. The Bluetooth will automatically detect them, and you can turn them on again by pressing the button on your phone. 

When your HeyDay wireless HI-Z earbuds have a pairable Bluetooth device, you can connect them to your smartphone by connecting them to the USB adapter.

If your HI-Z earbuds are not working, you may need to reset them manually. You can also press the phone button on the HEYDAY EARBUD 04 to make them work. 

After that, you should be able to pair the HI-Z earbuds with your phone by using Bluetooth settings. 

Once the HI-Z h-Z earbuds are properly paired, they will automatically turn on and turn off if you remove the charging case from the HI-Z EARBUD-04.

If you are unable to pair the Heyday HI-Z earbuds with your phone, you can use the phone button on the earbuds to power them on. 

Once connected, they will automatically enter pairing mode. To continue using the device, press the volume button to turn them on or off. Then, push the button to turn off Bluetooth. Then, push the button on the HI-Z earbuds.


When you are connected to your device, the HI-Z earbuds may stop working. You can use the charging case to connect your HI-Z earbuds to your device. 

Just be sure to connect them to the charging case first to avoid any further problems. 

You can also try the following method to reset Heyday wireless earbuds: The HI-Z earbuds are compatible with any Bluetooth device. 

To reconnect your HI-ZH EARBUDS, simply plug them into the charging case.